Home News 2020 Metso Outotec launches compact large-capacity primary crusher for above and underground applications
Product news November 10, 2020 10:00:00 AM CET

Metso Outotec launches compact large-capacity primary crusher for above and underground applications

Metso Outotec Corporation’s press release on November 10, 2020, at 10:00 a.m. EET

 

Metso Outotec is launching an extension to it’s primary gyratory crusher range: The SUPERIOR™ MKIII 6275UG. The new crusher, which can be used in different types of applications, provides large capacity with significant savings in CAPEX and operating costs.

“We are very excited about the  SUPERIOR™ MKIII 6275UG.  As a direct response to the market demand, we’ve designed a more compact primary gyratory crusher reducing CAPEX that is applicable to both underground and above ground applications for the mining industry. We think that we have achieved our goal and upheld the superior standards we are known for,” says Jim Bathie, VP Mining Crushers at Metso Outotec.

The crusher was born out of a need for a high capacity underground primary crusher that did not require a primary feeder, scalper, and the associated infrastructure therein.  Minimizing the need for high cost stationary grids to control topsize underground was a requisite, and the large topsize acceptance was met with the UG design. Additional requirements for an underground crusher were the ability to transport the components down shafts with spacial restrictions, assemble the crusher with minimal need for welding and hot works, and the ability to feed the crusher from 360 degrees around the feed opening; these were all met with the 6275UG MKIII.

The 6275UG crusher’s feed opening is 15% larger than in similar crushers, while also reaching up to 30% more capacity than comparable crushers. Optimized production can be ensured with advanced automation. The up to 10% reduction in station height translates into a remarkable reduction in the CAPEX costs, reaching even 20%.

Some additional key design targets for this new crusher were less downtime and easy maintenance. In MKIII UG, downtime can be reduced by up to 70% thanks to concave replacements with another Metso Outotec proprietary innovation, the Rotable Topshell. 

Additional benefits with the SmartStation concept

The SUPERIOR™ MKIII 6275UG is designed to be part of a SmartStation, where productivity and availability are optimized with sophisticated automation in each phase of the process. 

Incoming material analysis is done automatically with
VisioTruck, and Metso Outotec Metrics provide analytical dashboards and condition monitoring to ensure optimal crusher performance. A consistent vault level is ensured with automatic crusher adjustments. VisioRock and control system is used for wear compensation.

Find out more about
SUPERIOR™ MKIII 6275UG on our website.

 

Further information, please contact:

Jim Bathie, VP Mining Crushers, Metso Outotec Corporation, Tel. +1 262 717 2652, E-mail: jim.bathie@metso.com

Helena Marjaranta, Vice President, Communications and Brand, Metso Outotec, Tel. +358 20 484 3212, E-mail: helena.marjaranta(at)mogroup.com

 

Metso Outotec is a frontrunner in sustainable technologies, end-to-end solutions and services for the aggregates, minerals processing, metals refining and recycling industries globally. By improving our customers’ energy and water efficiency, increasing their productivity, and reducing environmental risks with our product and process expertise, we are the partner for positive change. 
Headquartered in Helsinki, Finland, Metso Outotec employs over 15,000 people in more than 50 countries and its illustrative combined sales for 2019 were about EUR 4.2 billion. The company is listed on the Nasdaq Helsinki.  mogroup.com, twitter.com/metsooutotec

MO 6275UG 01 SplitShell HiRes