Webinar: Metallurgy, key challenges and technical solutions in e-scrap smelting

Webinar

Date

17 Jun, 2021

Location

ON-DEMAND WEBINAR

Your information is safe. Check our privacy notice for more details.

Webinar recording

Availability of WEEE (Waste Electrical and Electronic Equipment) is increasing and so is the need for its sustainable recycling. The valuable waste derived from WEEE represents a growing revenue source, which is possible to treat profitably if you have a professional partner to support in designing the flowsheet and delivering the right type of process technology to suit your particular feed suite.

Please join us for the second part of the Metso Outotec eScrap webinars. This time, we will focus on the metallurgy and key challenges in e-scrap processing and how you can solve these. Our experts Ross Andrews, Hannes Holmgren, Mari Lindgren and Niklas Olsson will introduce flowsheet optimization by experimental testing, modelling and discuss the behavior of the main impurities and gas cleaning challenges specific to e-scrap smelting.

After this webinar, you will understand

fundamental metallurgy and the main technical challenges in e-scrap processing
how experimental testing and modelling enable flowsheet optimization
the behavior of main impurities in e-scrap smelting
the need for a comprehensive, integrated gas handling solution

Webinar duration is 1 hour including Q & A, This webinar will be in English

COMPLETE THE FORM TO ACCESS THE RECORDING!

Mari Lindgren

Mari Lindgren is the Director of RTD, smelting in Metso Outotec Research Center in Pori, Finland. Mari has Ph. D in Materials Engineering. She has 20+ years in research in various roles. Mari has published 45+ peer-reviewed articles and 25+ conference papers. Mari’s RTD team is involved in both experimental research and modelling activities.

Hannes Holmgren

Hannes Holmgren (M. Sc.) is working as technology manager for Kaldo and Precious Metals smelting solutions at Metso Outotec Sweden AB since 2018.

Hannes have 10 years previous working experience at Boliden Rönnskär smelter at various positions i.a. process engineering, process planning and as manager of the sampling department. Hannes knowledge about Kaldo smelting ranges from initial process calculations to commissioning including smelting of complex raw materials like e-scrap.

Ross Andrews

Ross Andrews has been working as a process engineer for Metso Outotec’s Ausmelt TSL group since 2003 and is currently the Process Design Manager for the TSL group based in Melbourne, Australia. Ross’ experience covers process designs and pilot plant studies, through to commissioning of smelters across of wide variety of non-ferrous smelting processes including secondary copper processing of e-scrap.